


Product Overview
Stainless steel clad plate consists of a base layer of carbon steel or low-alloy steel and a cladding layer of stainless steel, bonded together metallurgically through a specialized process. This composite material combines the corrosion and wear resistance of stainless steel with the strength and mechanical properties of carbon steel, while significantly reducing costs.


Process Flow


Product Specifications and Dimensions
| Grade | 304+316, N08825+304, 304+2205, 10S+430,etc304+316,N08825+304,304+2205,10S+430,ETCN08825+304304+316, N08825+304, 304+2205, 10S+430,etc |
| Cladding thickness | 2-14mm |
| Finish product thickness | 6-150mm |
| Finish product width | ≤4000 mm |
| Finish product length | :≤13500mm |
| Applicable standard | GB/T 8165-2008 Stainless Steel Clad Plate and Strip |
NB/T 47002-2019 Clad Plate for Pressure Vessels | |
| GB/T 8547-2006 Titanium-steel Clad Plate | |
ASME SA-263 Chromium Stainless Steel Clad Plate | |
| ASME SA-264 Chrome-nickel Stainless Steel Clad Plate |
Tensile and impact properties
牌号 Steel grade | 标准和实绩 Standard and measured data | 屈服强度 Yield strength | 抗拉强度 Tensile strength (Mpa) | 断后伸长率 Elongation after breaking | 冲击功 Impact work | |
TE304C1® | 标准要求 Standard requirement | ≥235 | 370-500 | ≥26 | ≥41 | |
生产实绩 Measured data | 范围 Range | 290-375 | 408-495 | 34-48 | 108-128 | |
平均值 Average | 326 | 438 | 41 | 120 | ||
TE4003C5® | 标准要求 Standard requirement | ≥450 | ≥500 | ≥22 | ≥41 | |
生产实绩 Measured data | 范围 Range | 509-592 | 587-655 | 23-39.5 | 166-184 | |
平均值 Average | 555 | 619 | 26 | 174 | ||
304/316+Q345R | 标准要求 Standard requirement | ≥345 | 490-620 | ≥22 | ≥41 | |
生产实绩 Measured data | 范围 Range | 350-474 | 514-610 | 23-31 | 107-358 | |
平均值 Average | 424 | 565 | 26 | 208 | ||
2205+Q235B | 标准要求 Standard requirement | ≥235 | 370-535 | ≥26 | ≥27 | |
生产实绩 Measured data | 范围 Range | 359-365 | 504-521 | 27-29 | 124-156 | |
平均值 Average | 362 | 513 | 28 | 144 | ||
牌号 Steel grade | 标准和实绩 Standard and measured data | 内弯 Inner bending | 外弯 Outer bending |
TE304C1® | 标准要求 Standard requirement | 180° d=2a 合 Qualified if 180° d=2a | 180° d=2a 合 Qualified if 180° d=2a |
生产实绩 Measured data | 合格,无裂纹 Qualified, no cracks | 合格,无裂纹 Qualified, no cracks | |
TE4003C5® | 标准要求 Standard requirement | 180° d=2a 合 Qualified if 180° d=2a | 180° d=2a 合 Qualified if 180° d=2a |
生产实绩 Measured data | 合格,无裂纹 Qualified, no cracks | 合格,无裂纹 Qualified, no cracks | |
304/316+Q345R | 标准要求 Standard requirement | 180° d=3a 合 Qualified if 180° d=3a | 180° d=3a 合 Qualified if 180° d=3a |
生产实绩 Measured data | 合格,无裂纹 Qualified, no cracks | 合格,无裂纹 Qualified, no cracks | |
2205+Q235B | 标准要求 Standard requirement | 180° d=2a 合 Qualified if 180° d=2a | 180° d=2a 合 Qualified if 180° d=2a |
生产实绩 Measured data | 合格,无裂纹 Qualified, no cracks | 合格,无裂纹 Qualified, no cracks |

Applications
1.Recommended combinations for applications such as hydraulic engineering, food processing equipment, construction formwork, and power plant coal hoppers: 304 + Q235B/Q345R

2.Recommended material combination for pressure vessels, reaction vessels, concentration towers, and natural gas processing equipment: 316L + Q345R

3.Recommended combination for seawater desalination, heat exchangers, and flue-gas desulfurization (FGD) towers (high-temperature, high-chloride environments): 2205 duplex stainless steel + Q345R/Q235B.

4.Recommended material combination for highly corrosive chemical equipment, such as catalyst extraction tanks: S32205 + Q345R
